TEENKING WATERJET WITH 5 AXIS TILTING HEAD
1, Imported motion parts from Japan;
2, Can do Compensation cutting, absolutely 90 degree cutting;
3, Tilting cutting with maxi 8 degrees, very useful in marble pattern;
4, Absolutely prevent water and dusty, ensure long working life;
5, Can make very high precision cutting parts;
6, Auto lubrication system;
7, Suitable with IGEMS software from Sweden.
1, Imported motion parts from Japan;
2, Can do Compensation cutting, absolutely 90 degree cutting;
3, Tilting cutting with maxi 8 degrees, very useful in marble pattern;
4, Absolutely prevent water and dusty, ensure long working life;
5, Can make very high precision cutting parts;
6, Auto lubrication system;
7, Suitable with IGEMS software from Sweden.
Teenking CNC Machinery CO.Ltd is located in Foshan,Guangdong,China.Teenking is an ISO2001 factory with CE for the waterjet cutting machine.We are professional in making waterjet cutting machine over than 9 years.
TK-Trump50-G2020 machine has maxi 420mpa pressure pump with Maxi 2000*2000mm gantry cutting table.The cutting accuracy can be up to ±0.08mm.
Teenking Waterjet has the following advantages:
1, the cutting accuracy, we are ±0.08mm,
2,all stainless steel covers for the machine,
3,Low/high pressure function, easy for fragile materials cutting
Low/High pressure shifting by programmed piercing control, especially used for breakable material.
4, Special software for Teenking--includes different materails cutting parameter
4, Special software for Teenking--includes different materails cutting parameter
smart control softwear with built-in dynamic ideal cut speed for different material and thickness.
5, wireless keboard and mouse
5, wireless keboard and mouse
wireless remote-control keboard work with laser pointer system, absolute easily and quickly locating of cutting head.
6,cutting head can be manual 60 degrees cutting
6,cutting head can be manual 60 degrees cutting
cutting head adjustable tilt ±60 degrees in X (or X&Y) dirrection, available for chamfering.
7,laser pointer for easy positioning cutting head
8,Siemens Motor
9,Omron parts,Schneider parts
7,laser pointer for easy positioning cutting head
8,Siemens Motor
9,Omron parts,Schneider parts
| TECHNICAL DATA OF CNC CUTTING PLATFORM | ||
|
Work area(X , Y) |
TK-Trump G series ( G=Gantry type ) | |
| X = Centry beam | Y = Base | |
| The max travel of X axis: | 2050mm | |
| The max travel of Y axis: | 2050 mm | |
| The max t ravel of Z axis: | 200 mm | |
| The max t ravel of A axis: | N/A | |
| The max t ravel of B(or C) axis : | N/A | |
| Max range of process(available cut area): | 2000X2000mm | |
| Cutting head: | 2 | |
|
Tolerance |
X axis per 300 mm | ±0 .05 mm ( ± 0.002") , |
| Y axis per 300 mm | ±0 .08 mm (±0.003") | |
| Cut Tolerance in X,Y per 300 mm | ± 0.05 mm(±0.002" per ft) | |
| Re-position precision | ± 0.01 mm (±0.0004") | |
| Max cutting tolerance in whole machine range | ±0.08mm(±0.003") | |
| The max speed of process | 15 m/min (600 ipm) | |
| System Lubricate | Auto-lubricate system(control by CNC controller) | |
| Hopper Abrasive | Volume adjustable abrasive hopper(control by CNC controller)-patented | |
|
Screw pneumatic Straightening system |
Too long screw in protecting by pneumatic straightening system patented | |
| Drive mode in each axis | CNC drive by servo motor system and ball-screw, linear-guide way in X,Y&Z axis | |
| Motion system in X&Y axis |
Ball screw &linear guide-way drive system from Taiwan. (TBI.HIWIN,ABBA) Servo motor in X&Y axis from Japan(Panasonic &YASKAWA) |
|
| Motion system in Z,A,B axis |
"THK" guide slider and Servo motor in "Z&A" axis from Japan Servo motor in "Z,A,B" axis from Japan (Panasonic &YASKAWA). |
|
| High pressure piping | Ø 6.35 × 9 meters & Ø 9.53 × 1.6 meters high-pressure tube from USA | |
