"Stainless Steel Emery:
1. Grade: G120. G80. G50. G40. G25. G20. G18. G16. G14. G12
2. Specification: 0.8mm
3. Application: Stone cutting, forging pieces high hardness of high chromium (chromium 15.3), high hardness, high wear resistance.
4. Hardness of bearing steel material itself 62 ~ ~ 65 (HRC) degree, by the unique heat treatment process, quenching hardness back solution to 45 ~ ~ 48 (HRC) degree (also according to customers need to reconcile the hardness) that is more conducive to clear cutting moment in the process of cutting, so that grit is more wear resistance, less breakable, sharp edges, impact resistance, low consumption and so on.
1. Grade: G120. G80. G50. G40. G25. G20. G18. G16. G14. G12
2. Specification: 0.8mm
3. Application: Stone cutting, forging pieces high hardness of high chromium (chromium 15.3), high hardness, high wear resistance.
4. Hardness of bearing steel material itself 62 ~ ~ 65 (HRC) degree, by the unique heat treatment process, quenching hardness back solution to 45 ~ ~ 48 (HRC) degree (also according to customers need to reconcile the hardness) that is more conducive to clear cutting moment in the process of cutting, so that grit is more wear resistance, less breakable, sharp edges, impact resistance, low consumption and so on.
| Grade |
Variation of Ball Diameter VDws |
Deviation from Spherical Form ΔSph |
Variation of Ball Lot Diameter VDwl |
Surface roughness Ra |
| G5 | 0.13 | 0.13 | 0.25 | 0.014 |
| G10 | 0.25 | 0.25 | 0.5 | 0.02 |
| G16 | 0.4 | 0.4 | 0.8 | 0.025 |
| G20 | 0.5 | 0.5 | 1 | 0.032 |
| G24 | 0.6 | 0.6 | 1.2 | 0.04 |
| G28 | 0.7 | 0.7 | 1.4 | 0.05 |
| G40 | 1 | 1 | 2 | 0.06 |
| G60 | 1.5 | 1.5 | 3 | 0.08 |
| G100 | 2.5 | 2.5 | 5 | 0.1 |
| G200 | 5 | 5 | 10 | 0.15 |
| G500 | 12.5 | 12.5 | 25 | |
| G1000 | 25 | 25 | 50 |
